Züst Simon HSLU T&A

Prof. Dr. Simon Züst Simon Züst

Lecturer

Züst Simon HSLU T&A

Lucerne School of Engineering and Architecture

Room D301
Technikumstrasse 21
6048 Horw


Institute of Innovation and Technology Management IIT

Lecturer

Co-Head of the Research Group

+41 41 349 30 44

Show email

Biography

Simon Züst (*1988) studierte Maschinenbau an der ETH Zürich und promovierte anschliessend am Institut für Werkzeugmaschinen und Fertigung im Bereich Modellierung und Simulation von Werkzeugmaschinen. Dabei war er in mehreren Forschungsprojekten zu den Themen thermische Dynamik von Werkzeugmaschinen, Fertigung im Nanometerbereich, Material- und Energieeffizienz in der Produktion, sowie zur innerbetrieblichen Logistik beteiligt. Bis 2020 arbeitete er als Ingenieur im Familienbetrieb Züst Engineering AG. In dieser Zeit arbeitete er mit über 20 Firmen zu den Themen Produktentwicklung, Ressourceneffizienz, Kühlfunktionen in Produktionssystemen, sowie Fabrikplanung und Standortentwicklung zusammen. Dabei fokussierte er sich auf die Entwicklung und den Einsatz von modellbasierten Methoden (Digital Twins). Seit 2020 ist er der Verantwortliche für die Module Entwicklung mechatronischer Systeme (MECH), Engineering Product Development Project (PDP) und Distributed Systems (DIST_SYS) am Institut für Innovation und Technologietransfer (IIT). Weiter ist er im Kompetenzzentrum CC Business Engineering tätig.

Subjects
  • Entwicklung mechatronischer Systeme
  • Engineering Product Development Project
  • Distributed Systems
  • Master-/Bachelor-Thesis
Professional competencies
  • Modellierung und Simulation von dynamischen Systemen
  • Produktentwicklung / Systems Engineering
  • Lean Six Sigma
  • Umweltgerechte Produktgestaltung
  • Produktionstechnik und Fertigungsorganisation

Projects

Research projects

  • Flagship DeCIRRA SP1: Communication platform for the multi stakeholder workshops
  • ReInvent
  • ITC - eco Hotel - Betriebsoptimierung
  • Analog_digital: Digitalisierungschancen in zwingenden Präsenzformaten in Design, Musik und Technik
  • Clart-E: Klarheit im Energie-Innovations-Ökosystem

Publications and presentations

Publications and presentations - Article, review; peer reviewed

  • Stoll, Oliver; Züst, Simon; Rodel, Eugen & West, Shaun (2023). Source-Target-Link-Matrix: A Conceptual Approach for the Systematic Design of Data-Driven Product Service Systems. Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures, doi: 10.1007/978-3-031-43666-6_2
  • Huonder, Michael; West, Shaun; Stoll, Oliver & Züst, Simon (21.12.2021). Life–Cycle Oriented Risk Assessment Using a Monte Carlo Simulation. Applied Sciences - Special Issue Smart Resilient Manufacturing, 12(1), 1-16. doi: https://doi.org/10.3390/app12010008
  • West, Shaun; Keiser, Yann; Stoll, Oliver & Züst, Simon (2022). Exploring factory digital production support system through the lens of Service Dominant logic. ITM Web of Conferences, 41, 1-15. doi: https://doi.org/10.1051/itmconf/20224104002
  • Züst, Simon; Züst, Rainer; Züst, Viturin; West, Shaun; Stoll, Oliver & Minonne, Clemente (20.5.2021). A graph based Monte Carlo simulation supporting a digital twin for the curatorial management of excavation and demolition material flows. Journal of Cleaner Production, (310), 1-11. doi: https://doi.org/10.1016/j.jclepro.2021.127453
  • West, Shaun; Meierhofer, Jürg; Stoll, Oliver & Züst, Simon (2021). Digital Twin Providing New Opportunities for Value Co-Creation through Supporting Decision-Making. Applied Sciences, 2021(9), 3750. doi: 10.3390/app11093750
  • Meierhofer, Jürg; Schweiger, Lukas; Lu, Jinzhi; Züst, Simon; West, Shaun; Stoll, Oliver & Kiritsis, Dimitris (2021). Digital Twin-Enabled Decision Support Services in Industrial Ecosystems. Applied Sciences, 2021(23), 11418. doi: 10.3390/app112311418
  • West, Shaun; Gaiardelli, Paolo; Ozbek, Duygu & Züst, Simon (2021). Exploring the alignment between servitization based value propositions and contracts. The Spring Servitization Conference 2021: A Pathway towards a Resilient, Productive and Sustainable Future, 1.
  • Keiser, Yann; West, Shaun & Züst, Simon (2021). Reflections from a Hybrid Approach Used to Develop a Specification of a Shopfloor Platform for Smart Manufacturing in an Engineered-to-Order SME. IFIP Advances in Information and Communication Technology, 633, 691-701. doi: http://dx.doi.org/10.1007/978-3-030-85910-7_73
  • Meierhofer, Jürg; Züst, Simon; Jinzhi, Lu; Schweiger, Lukas & Kiritsis, Dimitris (2021). Enabling decision support services in industrial ecosystems by digital twins. Applied Sciences, 11, 1-18. doi: https://doi.org/10.3390/app112311418
  • Barni, Andrea; Pietraroia, Dario; Züst, Simon; West, Shaun & Stoll, Oliver (2020). Digital Twin Based Optimization of a Manufacturing Execution System to Handle High Degrees of Customer Specifications. Journal of Manufacturing and Materials Processing, 2020(4), 109.
  • Mohammadi, Ali; Züst, Simon; Blaser, Philipp; Mayr, Josef; Sonne, Mads Rostgaard; Hattel, Jesper Henri & Wegener, Konrad (2017). A methodology for online visualization of the energy flow in a machine tool. CIRP Journal of Manufacturing Science and Technology, 19, 138-146.
  • Fischer, Ludger Josef; Pfister, M.; Stamatiou, Anastasia; von Arx, Silvan; Züst, Simon & Worlitschek, Jörg (2017). Investigation of heat transfer in phase change dispersions (PCD). JP Journal of Heat and Mass Transfer, 485-510. doi: 10.17654/HM014040485
  • Fischer, Ludger Josef; von Arx, Silvan; Wechsler, Ueli; Worlitschek, Jörg & Züst, Simon (2017). Phase change dispersion properties, modeling apparent heat capacity. International Journal of Refrigeration, 2017(74), 240-253.
  • Züst, Simon; Pavliček, Florentina; Fischer, Ludger Josef; Wegener, Konrad & Weiss, Lukas (2016). Thermo-energetic modelling of machine tool spindles with active cooling based on macro models. International Journal of Mechatronics and Manufacturing Systems, (9(3)), 197-214. doi: 10.1504/IJMMS.2016.079585
  • Schudelei, Timo; Züst, Simon; Weiss, Lukas & Wegener, Konrad (2016). The Total Energy Efficiency Index for Machine Tools. Energy, 102(1), 682-693.
  • Schudelei, Timo; Züst, Simon & Wegener, Konrad (2016). Energy Equivalents to Quantify the Total Electricity Consumption of Factory-integrated Machine Tools. International Journal of Advanced Manufacturing Technology, 90, 3239-3247. doi: https://doi.org/10.1007/s00170-016-9659-0
  • Schudelei, Timo; Züst, Simon; Weiss, Lukas & Wegener, Konrad (2016). Machine Tool Energy Efficiency – A Component Mapping-Based Approach. International Journal of Automation Technology, 10(5), 717-726.
  • Fischer, Ludger Josef; von Arx, Silvan; Züst, Simon; Worlitschek, Jörg & Wechsler, U. (2016). Phase change dispersion, potentially a new class of heat transf er fluids. Journal of Physics: Conference Series, 745(3), 1-8. doi: 10.1088/1742-6596/745/3/032133
  • Schudelei, Timo; Züst, Simon & Wegener, Konrad (2015). Methods for Evaluation of Energy Efficiency of Machine Tools. Energy, 93(2), 1964-1970.

Publications and presentations - Article, review; not peer reviewed

  • Lüchinger, Richard; Stoll, Oliver & Züst, Simon (2021). Innovationsökosystem unter der Lupe_. Bulletin.ch / Electrosuisse VSE/AES, 49.
  • Züst, Simon; Weiss, Lukas & Züst, Rainer (2013). Weniger ist mehr: Optimierte Kühlschmiermittelsysteme für Werkzeugmaschinen. Sonderausgabe Umwelt Perspektiven: Energieeffizienz, Produktionseffizienz, Materialeffizienz. Best Practice Guide, 5.

Publications and presentations - Theses (Bachelor/Master/Dissertation/Habilitation)

  • Züst, Simon (2017). Model Based Optimization of Internal Heat Sources in Machine Tools. Dissertation, ETH Zürich, Schweiz.

Publications and presentations - Presentation (conference/report/lectures)

  • Pavliček, Florentina; Dietz, Flurin; Blaser, Philipp; Züst, Simon; Mayr, Josef; Weikert, Sascha & Wegener, Konrad (23.10.2016). An approach for developing meta models out of fluid simulations in enclosures of precision machine tools. 31st ASPE Annual Meeting, Portland, Oregon, USA.
  • Züst, Simon; Paul, Philip; Weiss, Lukas & Wegener, Konrad (05.09.2016). Modelling and Compensation of Thermally Induced Positioning Errors in a High Precision Positioning Application. Proceedings of the 7th IFAC Symposium on Mechatronic Systems, Loughborough University, Vereinigtes Königreich.
  • Züst, Simon; Schudelei, Timo & Wegener, Konrad (22.05.2016). Development and Application of an Eco-design Tool for Machine Tools. 23rd CIRP Conference on Life Cycle Engineering, Berlin, Deutschland.
  • Pavliček, Florentina; Hernández Becerro, Pablo; Mayr, Josef; Weikert, Sascha; Züst, Simon & Wegener, Konrad (17.03.2016). Influence of machine housing on the thermal TCP displacement. Euspen Special Interest Group Meeting: Thermal Issues, Prag, Tschechien.
  • Züst, Simon; Pavliček, Florentina; Fischer, Ludger Josef; Weiss, Lukas & Wegener, Konrad (17.03.2016). Macro-Models for Modeling and Simulation of Cooled Spindles. EUSPEN Special Interest Group Meeting: Thermal Issues, Prag.
  • Fischer, Ludger Josef; Weiss, Lukas; Züst, Simon & Reinhard, Edwin (22.01.2016). Phase Change Dispersions (PCD) for Isothermal Operation of Machine Tools. Swiss Symposium for thermal energy storage, Horw.
  • Schudelei, Timo & Züst, Simon (19.01.2016). Electrical Energy Equivalents for Factory-integrated Machine Tools. Schweizer Schleif-Symposium 2016, Zürich, Schweiz.
  • Paul, Philip; Züst, Simon; Holzner, Felix; Bonanni, Simon; Rawlings, Collin; Dürig, Urs; Wegener, Konrad & Knoll, Armin (01.06.2015). Positioning for Thermal Scanning Probe Lithography. Euspen 15th International Conference & Exhibition, Leuven, Niederlande.
  • Gontarz, Adam; Pavliček, Florentina; Mayr, Josef; Wegener, Konrad & Züst, Simon (03.06.2014). Model based prediction approach for internal machine tool heat sources on the level of subsystems. 3rd CIRP Global Web Conference, Neapel.
  • Züst, Simon; Gontarz, Adam & Wegener, Konrad (23.09.2013). Energy Equivalent of Compressed Air Consumption in a Machine Tool Environment. 11th Global Conference on Sustainable Manufacturing, Berlin, Deutschland.
  • Züst, Simon (19.03.2013). Ecodesign-Prozess und Umsetzung: Einsatz von Ecodesign-Methoden. Cleantech City Fachtagung 7: Eco-Design, Bern, Schweiz.
  • Züst, Simon; Gontarz, Adam; Weiss, Lukas & Wegener, Konrad (31.10.2012). Energetic machine tool modeling approach for energy consumption prediction. 10th Global Conference on Sustainable Manufacturing, Istanbul.

Achievements

    • Weiss, Lukas; Züst, Simon; Fischer, Ludger Josef; Worlitschek, Jörg & Reinhard, Edwin (27.03.2018). Apparatus for cooling machine components using phase-change material No. US9925633B2. USA: ) United States Patent.

    • Fischer, Ludger Josef; Worlitschek, Jörg & Züst, Simon (27.01.2016). Apparatus for cooling machine components using phase-change material (pcm) No. CN105269395A. China: 中华人民共和国国家知识产权局.

    • Weiss, Lukas; Züst, Simon; Fischer, Ludger Josef; Worlitschek, Jörg & Reinhard, Edwin (03.12.2015). Apparatus for cooling machine components using phase change material No. US20150343588A1. United States: Us Patent office.

    • Fischer, Ludger Josef; Worlitschek, Jörg & Züst, Simon (12.02.2015). Vorrichtung zur Kühlung von Maschinenbauteilen mittels PCM No. EP2949422. Europa: EP in München.

    • Züst, Simon (05.06.2013). Zuger Wissenschaftspreis 2013 1. Platz für die Masterarbeit "Development and verification of an energetic machine tool model on the example of a turning machine".

Achievements - Patent

  • Weiss, Lukas; Züst, Simon; Fischer, Ludger Josef; Worlitschek, Jörg & Reinhard, Edwin (27.03.2018). Apparatus for cooling machine components using phase-change material No. US9925633B2. USA: ) United States Patent.
  • Fischer, Ludger Josef; Worlitschek, Jörg & Züst, Simon (27.01.2016). Apparatus for cooling machine components using phase-change material (pcm) No. CN105269395A. China: 中华人民共和国国家知识产权局.
  • Weiss, Lukas; Züst, Simon; Fischer, Ludger Josef; Worlitschek, Jörg & Reinhard, Edwin (03.12.2015). Apparatus for cooling machine components using phase change material No. US20150343588A1. United States: Us Patent office.
  • Fischer, Ludger Josef; Worlitschek, Jörg & Züst, Simon (12.02.2015). Vorrichtung zur Kühlung von Maschinenbauteilen mittels PCM No. EP2949422. Europa: EP in München.

Achievements - Awards and honours

  • Züst, Simon (05.06.2013). Zuger Wissenschaftspreis 2013 1. Platz für die Masterarbeit "Development and verification of an energetic machine tool model on the example of a turning machine".